PENINGKATAN HASIL BELAJAR PEMBELAJARAN TEKNIK MESIN FRAIS MENGGUNAKAN MODEL PEMBELAJARAN CYCLE 5E
Abstract
Pendidikan vokasi bertujuan menyiapkan siswa untuk dapat masuk dunia industri atau pendidikan yang lebih tinggi yang di bekali keterampilan yang relevan. Penelitian ini dilakukan untuk melihat peningkatan hasil belajar teknik mesin frais pendidikan vokasi dan keterlibatan siswa kelas XI di SMKN 5 Padang dengan menerapkan model Siklus Belajar 5E. Penelitian ini adanya peningkatan progresif dalam aktivitas belajar peserta didik di seluruh siklus, meskipun persentase keseluruhan siswa yang memenuhi target penelitian masih di bawah ekspektasi. Berdasarkan hasil penelitian, implementasi Learning Cycle 5E di pendidikan kejuruan berhasil menumbuhkan hasil belajar para siswa di aspek kognitif. Model ini memfasilitasi partisipasi aktif siswa dan eksplorasi materi pelajaran, sehingga terjadi peningkatan relatif signifikan yang sejumlah siswanya mencapai penguasaan materi. Hasil penelitian menampilkan keberhasilan pada peningkatan keterlibatan dan pemahaman siswa, yang mengarah kepada hasil belajar. Evaluasi dilakukan di tiap siklus dengan menggunakan soal-soal ranah kognitif untuk mengukur hasil belajar siswa. Penelitian ini menyimpulkan bahwa model Siklus Belajar 5E merupakan pendekatan yang efektif untuk mengajarkan mata pelajaran kejuruan, melampaui indikator keberhasilan yang sudah ditetapkan. Sebagai hasilnya bahwa penelitian ini memiliki tingkat ketuntasan klasikal mencapai 87%, melebihi batas kelulusan minimal 75%. Maka dari itu, penelitian mendukung keefektifan Siklus Belajar 5E dalam peningkatan hasil belajar teknik mesin frain para peserta didik.
References
Arikunto, S. (2012). Prosedur Penelitian Suatu Pendekatan Praktek. In Jakarta: Rineka Cipta (p. 174).
Ariwibowo, B., Made Sudana, I., Atika, A., & Makruf, A. (2020). Soft skills analysis of educational student in vocational study program of mechanical engineering Ivet University. Journal of Vocational and Career Education, 5(1), 14–20. https://doi.org/10.15294/jvce.v5i1.26755
Asrizal, Yurnetti, & Usman, E. A. (2022). ICT Thematic Science Teaching Material With 5E Learning Cycle Model To Develop Students’ 21St-Century Skills. Jurnal Pendidikan IPA Indonesia, 11(1), 61–72. https://doi.org/10.15294/jpii.v11i1.33764
Deria, A., Fadilah, M., Nisa, I. K., Fortuna, A., Fajriansyah, B., Salsabila, P., Mardiansyah, R., Alika, F. A., Lismita, L., & Junita, U. (2023). Effect of Project Based Learning (PJBL) Learning Model on Creative Thinking Ability of High School Biology Students: A Literature Review. PAKAR Pendidikan, 21(1), 58–64. https://doi.org/10.24036/pakar.v21i1.288
Eliawati, T., & Harahap, D. I. (2020). Classroom Action Research: Measuring Integration of Character Education in Language Learning. Proceedings of the 4th Annual International Seminar on Transformative Education and Educational Leadership, 384, 260–263. https://doi.org/10.2991/aisteel-19.2019.56
Firdaus, F. N. (2019). Pengaruh Kecepatan Putar dan Penyayatan Endmill Cutter Type HSS Terhadap Tingkat Kekerasa Alumunium Pada Mesin CNC. Jurnal Teknik Mesin Dan Pembelajaran, 4(1), 27–36.
Hartoni, H. (2018). Impelementasi Manajemen Sarana Dan Prasarana Di Sekolah Menengah Kejuruan. Al-Idarah: Jurnal Kependidikan Islam, 8(1), 178. https://doi.org/10.24042/alidarah.v8i1.3088
Inderanata, R. N., & Sukardi, T. (2023). Investigation study of integrated vocational guidance on work readiness of mechanical engineering vocational school students. Heliyon, 9(2), e13333. https://doi.org/10.1016/j.heliyon.2023.e13333
Jasman, J. (2019). Hubungan Minat Belajar dengan Hasil Belajar dalam Mata Pelajaran SMAW di SMK Negeri 1 Sumatera Barat. Jurnal Pendidikan Teknologi Kejuruan, 2(2), 53–60. https://doi.org/10.24036/jptk.v2i2.5323
Kholis, N., Kartowagiran, B., & Mardapi, D. (2020). Development and validation of an instrument to measure a performance of vocational high school. European Journal of Educational Research, 9(3), 955–966. https://doi.org/10.12973/EU-JER.9.3.955
Maryanti, R., Hufad, A., Sunardi, S., Nandiyanto, A. B. D., & Kurniawan, T. (2021). Analysis of curriculum for science education for students with special needs in vocational high schools. Journal of Technical Education and Training, 13(3), 54–66. https://doi.org/10.30880/jtet.2021.13.03.006
Maryanti, R., & Nandiyanto, A. B. D. (2021). Curriculum Development in Science Education in Vocational School. ASEAN Journal of Science and Engineering Education, 1(3), 151–156. https://doi.org/10.17509/ajsee.v1i3.38429
Meesuk, P., Sramoon, B., & Wongrugsa, A. (2020). Classroom Action Research-based Instruction: The Sustainable Teacher Professional Development Strategy. Journal of Teacher Education for Sustainability, 22(1), 98–110. https://doi.org/10.2478/jtes-2020-0008
Misbah, Z., Gulikers, J., Dharma, S., & Mulder, M. (2020). Evaluating competence-based vocational education in Indonesia. Journal of Vocational Education and Training, 72(4), 488–515. https://doi.org/10.1080/13636820.2019.1635634
Okolie, U. C., Nwajiuba, C. A., Binuomote, M. O., Osuji, C. U., Onajite, G. O., & Igwe, P. A. (2020). How careers advice and guidance can facilitate career development in technical, vocational education, and training graduates: The case in Nigeria. Australian Journal of Career Development, 29(2), 97–106. https://doi.org/10.1177/1038416220916814
Ozer, M., & Perc, M. (2020). Dreams and realities of school tracking and vocational education. Palgrave Communications, 6(1), 1–7. https://doi.org/10.1057/s41599-020-0409-4
Prasetya, F., Fajri, B. R., Wulansari, R. E., Primawati, & Fortuna, A. (2023). Virtual Reality Adventures as an Effort to Improve the Quality of Welding Technology Learning During a Pandemic. International Journal of Online and Biomedical Engineering (IJOE), 19(2), 4–22. https://doi.org/10.3991/ijoe.v19i02.35447
Prasetya, F., Fortuna, A., Samala, A. D., Fajri, B. R., Efendi, F., & Nyamapfene, A. (2023). Effectiveness of Distance Learning Computer Numerical Control Based on Virtual Laboratory Using a Metaverse Platform to Improve Students’ Cognitive Ability and Practice Skills. International Journal of Interactive Mobile Technologies (IJIM), 17(24), 4–21. https://doi.org/10.3991/ijim.v17i24.45019
Prasetya, F., Syahri, B., Fajri, B. R., Wulansari, R. E., & Fortuna, A. (2023). Utilizing Virtual Laboratory to Improve CNC Distance Learning of Vocational Students at Higher Education. TEM Journal, 12(3), 1506–1518. https://doi.org/10.18421/TEM123-31
Ramdani, A., Jufri, A. W., Gunawan, Fahrurrozi, M., & Yustiqvar, M. (2021). Analysis of students’ critical thinking skills in terms of gender using science teaching materials based on the 5e learning cycle integrated with local wisdom. Jurnal Pendidikan IPA Indonesia, 10(2), 187–199. https://doi.org/10.15294/jpii.v10i2.29956
Suharno, Pambudi, N. A., & Harjanto, B. (2020). Vocational education in Indonesia: History, development, opportunities, and challenges. Children and Youth Services Review, 115, 105092. https://doi.org/10.1016/j.childyouth.2020.105092
Submitted
Copyright (c) 2024 Jurnal Vokasi Mekanika
This work is licensed under a Creative Commons Attribution 4.0 International License.
.svg_.png)
