Analysis of Musculoskeletal Disorders in Electric Vehicle Prototype Drivers Using the Nordic Body Map Method
Abstract
The dwindling availability of fossil-based energy sources has spurred breakthroughs in the evolution of eco-conscious transportation, one of which is manifested in the Indonesian Electric Car Competition (Kompetisi Mobil Listrik Indonesia – KMLI). In this arena, collegiate teams engineer lightweight, single-occupant electric prototype vehicles emphasizing energy thrift. Nonetheless, spatial constraints and performance optimization frequently take precedence over ergonomic design, heightening the likelihood of musculoskeletal strain. This investigation seeks to examine bodily discomforts related to the musculoskeletal system as encountered by the operator of a prototype electric vehicle, employing the Nordic Body Map (NBM) assessment tool. The inquiry adopted a descriptive format via a focused case analysis involving the primary driver from the Megathrust Eco Team representing Universitas Negeri Padang (UNP) in the 2024 KMLI. Post-operation, the participant filled out the NBM form to denote discomfort regions, referencing a Likert-type scale from 1 (no pain) to 4 (extreme pain). The outcomes identified the cervical region, shoulders, dorsum, and lumbar zone as areas with elevated distress, classified under Pain and Intense Pain levels, thus revealing substantial ergonomic concerns. From these insights, it is inferred that the seating layout and cockpit geometry must be reconsidered and fine-tuned according to the driver’s anthropometric dimensions to alleviate physical complaints and boost vehicular comfort. The study aspires to aid in fostering electric vehicles that are more attuned to human-centered design, balancing well-being and operational safety.
References
BPS. (2022). Produksi Minyak Bumi dan Gas Alam, 1996-2023. Badan Pusat Statistik.
Dewi, N. F. (2020). Identifikasi Risiko Ergonomi dengan Metode Nordic Body Map Terhadap Perawat Poli RS X. Jurnal Sosial Humaniora Terapan, 2(2). https://doi.org/10.7454/jsht.v2i2.90
Direktorat Politeknik Negeri Bandung. (2024). Panduan Kompetisi Mobil Listrik Indonesia XIII Tahun 2024. In Politeknik Negeri Bandung. http://kmli.polban.ac.id
ESDM. (2024). Wujudkan Kemandirian Energi , Wamen ESDM Dorong Pertamina Tingkatkan Produksi Minyak. Kementerian Energi Dan Sumber Daya Mineral Republik Indonesia.
Fuadilah Habib, M. A., Kurrotaa’yun Nuriski, W. N., & Zamzami, R. (2022). Be Kepo (Bioetanol Ketela Pohon) Inovasi Pemberdayaan Ekonomi Masyarakat dan Solusi Sumber Energi Alternatif Terbaharukan. Equilibrium: Jurnal Pendidikan, 10(1), 110–123. https://doi.org/10.26618/equilibrium.v10i1.6618
Gunev, D., & Iliev, S. (2021). The basic geometric parameters of the driving position of a battery electric, prototype class vehicle for the Shell Eco-marathon competition. AIP Conference Proceedings, 2439(October). https://doi.org/10.1063/5.0069048
Khan, H., Khan, I., & Binh, T. T. (2020). The heterogeneity of renewable energy consumption, carbon emission and financial development in the globe: A panel quantile regression approach. Energy Reports, 6, 859–867. https://doi.org/10.1016/j.egyr.2020.04.002
Maulidatul Masudha, Enik, S., & Rizky, S. (2024). Identifikasi Ergonomi Postur Kerja dengan Metode Nordyc Body Map (NBM) dan Rapid Entire Body Assessment (Reba) di UMKM Mandiri Furnitur Pasuruan. Jurnal Teknologi Dan Manajemen Sistem Industri, 3(2), 112–125. https://doi.org/10.56071/jtmsi.v3i2.1038
Nooryana, S., Adiatmika, I. P. G., & Purnawati, S. (2020). Latihan Peregangan Dinamis Dan Istirahat Aktif Menurunkan Keluhan Muskuloskeletal Pada Pekerja Di Industri Garmen. Jurnal Ergonomi Indonesia (The Indonesian Journal of Ergonomic), 6(1), 61. https://doi.org/10.24843/jei.2020.v06.i01.p08
Radhwa, D., & Danish, M. (2024). Meningkatkan Kenyamanan Dan Kesejahteraan Di Tempat Kerja: Peran Ergonomi Dalam Meningkatkan Produktivitas Karyawan. Jurnal Ekonomi, Manajemen Dan Akuntansi, 2(5), 671–680.
Republik, I. P. (2019). Peraturan Presiden Republik Indonesia Nomor 55 Tahun 2019 tentang Percepatan Program Kendaraan Bermotor Listrik Berbasis Baterai untuk Transportasi Jalan. In Sekretariat Negara Republik Indonesia. https://doi.org/10.51266/jba.v10i1.360
Setyono, A. E., & Kiono, B. F. T. (2021). Dari Energi Fosil Menuju Energi Terbarukan: Potret Kondisi Minyak dan Gas Bumi Indonesia Tahun 2020 – 2050. Jurnal Energi Baru Dan Terbarukan, 2(3), 154–162. https://doi.org/10.14710/jebt.2021.11157
Suarjana, I. W. G., Pomalingo, M. F., Palilingan, R. A., & Parhusip, B. R. (2022). Perancangan Fasilitas Kerja Ergonomi Menggunakan Data Antropometri Untuk Mengurangi Beban Fisiologis. Jurnal Ilmiah Teknik Industri, 10(2), 109–117. https://doi.org/10.24912/jitiuntar.v10i2.17755
Tarwaka, Bakri, S. H., & Sudiajeng, L. (2004). Ergonomi Untuk Keselamatan, Kesehatan Kerja dan Produktifitas (1st ed.). Uniba Press.
Thawafani, L., Falah, F. N., Saraswati, C., & Setiyawan, F. C. (2018). The 8 th University Research Colloquium 2018 Universitas Muhammadiyah Purwokerto Rancangan Ruang Kemudi Menggunakan Ilmu Ergonomi Pada Prototype Mobil Listrik “ ABABIL ” Design of Car Cockpit Using Ergonomic Science on Electricity Car Prototype “ ABABIL .” 89–96.
Wisnuwardana, S. G. (2022). Analisis Keluhan Musculosceletal Disorder Dengan Metode Nordic Body Map Pada Pt. Aimfood Manufacturing Indonesia. Industrial Engineering Online Journal, 11(4), 1–4.
YACARANDA. (2023). Super Sekip Ev-3 Evo. https://yacaranda.sv.ugm.ac.id/
Yunika, C., & Safithry, S. (2023). Analisis Postur Kerja Dan Keluhan Musculoskeletal Disorders (Msds) Pada Petani (Studi Literature Riview). Zahra: Journal of Health and Medical Research, 3(Oktober), 395–405.
Zadry, H. R., Fithri, P., Triyanti, U., & Meilani, D. (2017). An ergonomic evaluation of mountaineering backpacks. ARPN Journal of Engineering and Applied Sciences, 12(18), 5333–5338.
Zahra, S. F., & Prastawa, H. (2023). Analisis Keluhan Muskuloskeletal Menggunakan Metode Nordic Body Map (Studi Kasus: Pekerja Area Muat PT Charoen Pokphand Indonesia Semarang). Industrial Engineering Online Journal , 12, 1–9.
Submitted
Copyright (c) 2025 Jurnal Vokasi Mekanika (VoMek)
This work is licensed under a Creative Commons Attribution 4.0 International License.
.svg_.png)
